Windows Permits in Nashville, TN

Contractor: Perfect Construction & Plumbing

Date: Sep 13, 2012

Permit type: Windows

Description: Construct a garage description cladding & trim - all/any trim, railings, vents and associated type elements are to be wood or cement fiberboard. clad material is not approved. wood or cement fiberboard shall be a smooth face material void of any simulated wood grain pattern or rough, unfinished appearance. all exposed exterior lumber should be grade number #1 or #2. lower grade lumber is unsuitable for exterior work. - exterior cladding material to be wood or cement fiberboard and may match the exposure of the main structure. if siding material/exposure does not match the main structure, then lap siding to be 6-width material with a maximum of 5 inches of exposure. siding material to be smooth and free of knots, rough, unfinished appearance and other imperfections. simulated wood stamp is not appropriate. - 2 x 4 inches wood corner boards are typical on the face of each exposed corner. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. - 2 x 4 inches wood casing typical at doors and windows. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. doors - overhead garage door and pedestrian entry doors may be steel with simple panel design. doors to be approved by staff prior to installation. roof - roof material may match the main structure. if roof material is not to match main structure, then roofing to be asphalt composite 3-tab shingle. unusual colors such as blue are not approved. roofing color to be approved by staff prior to installation if it does not match the existing house. foundation - foundation to be a maximum of six (6) inches in height from grade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff m

Client: Decastro, Carlos

Parcel #: 08302011100

Permit #: HCPERMIT 201200262

Contractor: Waller Electric Service

Date: Oct 8, 2012

Permit type: Windows

Description: 10/08/12-dgl-400amp meter service to replace 3 windows and front door also rebuilding front entry stair/ ***pursuant to ordinance no 2006-1263 of the metropolitan code of laws i holder of this permit hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code***.

Fee: $75.00 paid to City of Nashville, Tennessee

Parcel #: 07205001800

Permit #: CAEL 201229707

Date: Oct 18, 2012

Permit type: Windows

Description: Rear and side addition| description| | foundation| - exterior foundation material shall exactly match the existing structure or be constructed of split-face block. | - foundation height shall match the existing house. | structure | - primary eave height shall be below the eave of the existing house. | - primary ridge height shall match or be below the ridge of the existing house. | roofing| - roofing material shall be asphalt composite shingles. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood with single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 08309013800

Permit #: HCN 201200292

Contractor: Precision Plumbing, Inc

Date: Oct 18, 2012

Permit type: Windows

Description: Rear and side addition description foundation - exterior foundation material shall exactly match the existing structure or be constructed of split-face block. - foundation height shall match the existing house. structure - primary eave height shall be below the eave of the existing house. - primary ridge height shall match or be below the ridge of the existing house. roofing - roofing material shall be asphalt composite shingles. - gutters shall be simple metal gutters. windows & doors - windows shall be wood with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibilit

Client: Spicher, Norman K.

Parcel #: 08309013800

Permit #: HCPERMIT 201200292

Contractor: Beazer Homes Corp.

Date: Oct 22, 2012

Permit type: Windows

Description: Screen porch addition and alterations description foundation - foundation walls shall be inset from the existing structure as noted on the site plan. - exterior foundation material shall exactly match the existing structure or be constructed of split-face block. - foundation height shall match the existing house. structure - primary eave height shall be below the eave of the existing house. - primary ridge height shall match or be below the ridge of the existing house. roofing - roofing material shall be asphalt composite shingles. - gutters shall be simple metal gutters. windows & doors - windows shall be wood with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. - front door shall be restored and rear doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being r

Client: Ballard, Anne T.

Parcel #: 10411026600

Permit #: HCPERMIT T201200312

Contractor: Peachtree Company Kb, Llc

Date: Oct 26, 2012

Permit type: Windows

Description: Replace hail damaged shingles, gutters, window screens. subject to inspectors approval. pursuant to ordinance no. 2006-1263 of the metropolitan code of laws, i (the holder on this permit) hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction and demolition waste shall be stored on the property in violation of any provision of the metropolitan code.

Client: Skinner, Jolene L. & Beck, Ronald D.

Parcel #: 11716003200

Permit #: CARK T201231738

Contractor: Robertson, D J

Date: Nov 7, 2012

Permit type: Windows

Description: To make general repairs to existing residence no change to footprint/ includes reroof windows etc; to be completed within 60 days as per r mitchell***pursuant to ordinance no 2006-1263 of the metropolitan code of laws i holder of this permit hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code***.

Fee: $75.00 paid to City of Nashville, Tennessee

Parcel #: 07015000800

Permit #: CAEL 201232877

Contractor: Robertson, D J

Date: Nov 7, 2012

Permit type: Windows

Description: To make general repairs to existing residence no change to footprint/ includes reroof windows etc; to be completed within 60 days as per r mitchell***pursuant to ordinance no 2006-1263 of the metropolitan code of laws i holder of this permit hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code***.

Fee: $75.00 paid to City of Nashville, Tennessee

Parcel #: 07015000800

Permit #: CAEL 201232878

Contractor: Benchmark Plumbing, Inc.

Date: Nov 13, 2012

Permit type: Windows

Description: Construct rear addition description foundation - foundation walls shall be inset from the existing structure as noted on the site plan. - exterior foundation material shall have a stone veneer to match the existing structure or be constructed of split-face block. - foundation height shall match the existing house. structure - primary eave height shall match or be below the eave of the existing house. - primary ridge height shall match or be below the ridge of the existing house. roofing - roofing material shall be asphalt composite shingles. - gutters shall be simple metal gutters. windows & doors - windows shall be wood with single-light sashes. window manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - paired windows shall have a 4" mullion between. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans

Client: Tishler, John C. & Sandra S.

Parcel #: 10411006000

Permit #: HCPERMIT 201200334

Contractor: Quirk Designs

Date: Nov 13, 2012

Permit type: Windows

Description: Construct rear addition| description| | foundation| - foundation walls shall be inset from the existing structure as noted on the site plan. | - exterior foundation material shall have a stone veneer to match the existing structure or be constructed of split-face block. | - foundation height shall match the existing house. | structure | - primary eave height shall match or be below the eave of the existing house. | - primary ridge height shall match or be below the ridge of the existing house. | roofing| - roofing material shall be asphalt composite shingles. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood with single-light sashes. window manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - paired windows shall have a 4" mullion between.| - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 10411006000

Permit #: HCN 201200334

Date: Nov 16, 2012

Permit type: Windows

Description: Construct new 1.5 story house| description| foundation| - exterior foundation material shall be parge-coated or constructed of split-face block. | - foundation height along the street facing wall match existing foundation or a maximum of 36 inches at the highest point. | structure| - primary eave height from the foundation shall be a maximum of 11.5 feet. | - primary ridge height from the foundation shall be a maximum of 28.5 feet. | roofing | - roofing material shall be composite asphalt shingles. | - roofing color must be approved by mhzc staff prior to installation. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood or aluminum-clad windows with single-light sashes. other materials may be substituted: with window manufacturer and type approved by mhzc staff prior to purchase and installation. | - doors shall be craftsman style 3-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. | - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. | - 4inch wide mullions are required between paired windows. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. | - exterior siding material shall be wood or smooth-faced cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner.| hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | walkways driveways and parking pads | - walkway shall be concrete. | - existing driveway may be retained repaved as needed.| general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 08208029600

Permit #: HCN 201200318

Contractor: Elizabeth Pogue Architect

Date: Nov 27, 2012

Permit type: Windows

Description: New detached accessory structure.| description| | cladding & trim| - exterior cladding material to be wood or cement fiberboard and may match the exposure of the main structure. if siding material/exposure does not match the main structure then lap siding to be 6-width material with a maximum of 5 inches of exposure. siding material to be smooth and free of knots rough unfinished appearance and other imperfections. simulated wood stamp is not appropriate. | - all/any trim railings vents and associated type elements are to be wood or cement fiberboard. clad material is not approved. wood or cement fiberboard shall be a smooth face material void of any simulated wood grain pattern or rough unfinished appearance. all exposed exterior lumber should be grade number #1 or #2. lower grade lumber is unsuitable for exterior work. | - 2 4 inches wood corner boards are typical on the face of each exposed corner. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. | - 2 4 inches wood casing typical at doors and windows. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. | windows & doors| - windows shall be wood with single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation.| - windows on clapboard structures shall not have brick-mold. | - overhead garage door and pedestrian entry doors may be steel with simple panel design. doors to be approved by staff prior to installation. | roof| - roof material may match the main structure. if roof material is not to match main structure then roofing to be asphalt composite 3-tab shingle. unusual colors such as blue are not approved. roofing color to be approved by staff prior to installation. | foundation| - foundation to be a maximum of si(6) inches in height from grade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500.

Parcel #: 13002006500

Permit #: HCN 201200349

Contractor: Myers Plumbing, Inc.

Date: Nov 27, 2012

Permit type: Windows

Description: New detached accessory structure. description cladding & trim - exterior cladding material to be wood or cement fiberboard and may match the exposure of the main structure. if siding material/exposure does not match the main structure, then lap siding to be 6-width material with a maximum of 5 inches of exposure. siding material to be smooth and free of knots, rough, unfinished appearance and other imperfections. simulated wood stamp is not appropriate. - all/any trim, railings, vents and associated type elements are to be wood or cement fiberboard. clad material is not approved. wood or cement fiberboard shall be a smooth face material void of any simulated wood grain pattern or rough, unfinished appearance. all exposed exterior lumber should be grade number #1 or #2. lower grade lumber is unsuitable for exterior work. - 2 x 4 inches wood corner boards are typical on the face of each exposed corner. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. - 2 x 4 inches wood casing typical at doors and windows. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. windows & doors - windows shall be wood with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. - windows on clapboard structures shall not have brick-mold. - overhead garage door and pedestrian entry doors may be steel with simple panel design. doors to be approved by staff prior to installation. roof - roof material may match the main structure. if roof material is not to match main structure, then roofing to be asphalt composite 3-tab shingle. unusual colors such as blue are not approved. roofing color to be approved by staff p

Client: Johnson, Joseph D., Jr. & Melissa A.

Parcel #: 13002006500

Permit #: HCPERMIT 201200349

Date: Nov 29, 2012

Permit type: Windows

Description: | description| - demolish existing porch addition; construct new rear addition.| foundation| - foundation walls shall be inset from the existing structure as noted on the site plan. | - exterior foundation material shall exactly match the existing structure or be constructed of split-face block. | - foundation height shall not be taller than that of the existing house. | roofing| - roofing material shall be epdm or similar. | - gutters and coping shall be metal . | windows & doors| - windows shall be wood with single-light sashes. window manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 10308020500

Permit #: HCN 201200237

Contractor: Morgan, Michael J

Date: Dec 26, 2012

Permit type: Windows

Description: Added 5 electric smoke detectors renovations to single family res.mdha.to include.some .reroofing gutters windows and railing. . pursuant ordinance # 2006-1263 metropolitan code of laws i (the holder on this permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metropolitan code.

Fee: $76.73 paid to City of Nashville, Tennessee

Parcel #: 05906003000

Permit #: CAEL 201237359

Contractor: Caldwell's Electric Company

Date: Jan 22, 2013

Permit type: Windows

Description: To install three (3) replacement windows from grundy street facade for non-res building. no increase to building footprint. separate use/rehab permits required. pursuant to ordinance no. 2006-1263 of the metropolitan code of laws, i (the holder on this permit) hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction and demolition waste shall be stored on the property in violation of any provision of the metropolitan code.

Fee: $85.59 paid to City of Nashville, Tennessee

Client: Gulch Grundy Partners, Llc

Parcel #: 09309012100

Permit #: CACR 201301949

Date: Feb 22, 2013

Permit type: Windows

Description: | description| - construct rear addition with attached garage.| roofing| - roofing material shall be asphalt composite shingles. color shall match existing or if not it shall be approved by the mhzc prior to purchase. | - gutters shall be simple metal gutters. | windows & doors| - windows shall have single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. | - door manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | - windows on existing house will be replaced. size of the window openings shall not change without the approval of mhzc staff. | siding & trim| - primary cladding material will be brick. staff needs to review a brick sample. | - any siding and trim shall be wood or smooth-faced cement-fiberboard or panels. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | - removal of cladding windows and roofing on the existing building all-together is partial-demolition and must be reviewed by the mhzc prior to work taking place. | |approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 11703005300

Permit #: HCN 201300037

Contractor: Benchmark Plumbing, Inc.

Date: Feb 22, 2013

Permit type: Windows

Description: Description - construct rear addition with attached garage. roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. - windows on existing house will be replaced. size of the window openings shall not change without the approval of mhzc staff. siding & trim - primary cladding material will be brick. staff needs to review a brick sample. - any siding and trim shall be wood or smooth-faced, cement-fiberboard or panels. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continu

Client: Meyer, Thomas & Amy

Parcel #: 11703005300

Permit #: HCPERMIT 201300037

Contractor: Mcclanahan Electric, Inc.

Date: Feb 27, 2013

Permit type: Windows

Description: Bank repo --- bank try to get ready to sell -service is in crawl space and riser between windows and i question if safe to reconnect -- please give feedback*** needing inspector to inspect. if rejects then they will get a full electrial permit.

Fee: $121.73 paid to City of Nashville, Tennessee

Parcel #: 04900016100

Permit #: CAEL 201305654

Contractor: Steven Stoeppler

Date: Apr 1, 2013

Permit type: Windows

Description: To construct a new front porch at 6x8.see plan.also renovations to res.to include window replacement. see amended plat 2013-0401-0031293. pursuant ordinance # 2006-1263 metropolitan code of laws i (the holder on this permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metropolitan code. i the undersigned of this permit (contractor) hereby swear or affirm that i am applying for a building permit from the dept of codes administration of the metropolitan government of nashville and davidson county and am exempt from the requirement of tca 13-8-211 (proof of workers compensation insurance) because i am not required to obtain coverage under the tennessee workers' compensation law.tca--50-6-104 - 106.

Fee: $53.85 paid to City of Nashville, Tennessee

Parcel #: 14611002600H1

Permit #: CARA 201306312