Windows Permits in Nashville, TN

Date: Mar 16, 2012

Permit type: Windows

Description: New construction - rear addition|| description| | foundation| - foundation walls shall be inset from the existing structure by four inches (4") on the right side of the structure and by twenty feet (20') on the left. - exterior foundation material shall exactly match the existing structure or be constructed of split-face block. | - foundation height shall match the existing house. | structure | - primary eave height shall match the eave of the existing house. | - primary ridge height shall be below the ridge of the existing house. | roofing| - roofing material shall be asphalt composite shingles. | - gutters shall be simple metal gutters. | windows & doors| - existing rear windows to be moved to right side of the addition. | - windows on rear and left side of addition shall not be visible from public right-of-way. - four (4") inch wood casings are required around doors windows and vents. siding & trim| - exterior to be stucco to match the upperstory of the existing structure.| - four inch (4") wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 10312000900

Permit #: HCN 201200066

Date: Mar 16, 2012

Permit type: Windows

Description: New construction - rear addition description foundation - foundation walls shall be inset from the existing structure by four inches (4") on the right side of the structure and by twenty feet (20') on the left. - exterior foundation material shall exactly match the existing structure or be constructed of split-face block. - foundation height shall match the existing house. structure - primary eave height shall match the eave of the existing house. - primary ridge height shall be below the ridge of the existing house. roofing - roofing material shall be asphalt composite shingles. - gutters shall be simple metal gutters. windows & doors - existing rear windows to be moved to right side of the addition. - windows on rear and left side of addition shall not be visible from public right-of-way. - four (4") inch wood casings are required around doors, windows, and vents. siding & trim - exterior to be stucco to match the upperstory of the existing structure. - four inch (4") wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. - any substitutions or deviation from the approved work requires further review and appr

Client: Succop, Nathan S. & Briana L.

Parcel #: 10312000900

Permit #: HCPERMIT 201200066

Contractor: Warner Construction Inc.

Date: Apr 2, 2012

Permit type: Windows

Description: To replace 3 windows and front door also rebuilding front entry stair/ ***pursuant to ordinance no 2006-1263 of the metropolitan code of laws i holder of this permit hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code***.

Fee: $172.59 paid to City of Nashville, Tennessee

Parcel #: 07205001800

Permit #: CACR 201208569

Contractor: Mtlc, Inc

Date: Apr 2, 2012

Permit type: Windows

Description: To rehab the basement area and main floor areas for matt sims office space. also rehab storefront windows. no increase to bldg footprint. pursuant to ordinance no. 2006-1263 of the metropolitan code of laws i (the holder on this permit) hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction and demolition waste shall be stored on the property in violation of any provision of the metropolitan code.

Fee: $1,127.77 paid to City of Nashville, Tennessee

Client: Simms Matthew A. & Allison W.

Parcel #: 09309010300

Permit #: CACR 201205704

Contractor: American Commercial Industrial Electric, Llc

Date: Apr 4, 2012

Permit type: Windows

Description: To rehab the basement area and main floor areas for matt sims office space. also rehab storefront windows. no increase to bldg footprint. pursuant to ordinance no. 2006-1263 of the metropolitan code of laws i (the holder on this permit) hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction and demolition waste shall be stored on the property in violation of any provision of the metropolitan code.

Fee: $81.42 paid to City of Nashville, Tennessee

Client: Simms Matthew A. & Allison W.

Parcel #: 09309010300

Permit #: CAEL 201209199

Date: Apr 5, 2012

Permit type: Windows

Description: Description| | foundation| - exterior foundation material shall be constructed of split-face block. | - foundation height along the street facing wall shall be a maximum of 24 inches at the highest point. | structure| - primary eave height from the foundation shall be a maximum of 10 feet. | - primary ridge height from the foundation shall be a maximum of 26 feet. | roofing | - roofing material shall be composite asphalt shingles. | - roofing color must be approved by mhzc staff prior to installation. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood or aluminum clad wood windows with single-light sashes. | - window manufacturer and type must be approved by mhzc staff prior to installation. | - doors shall be 1/4 light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. | - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. | - wood brick mold is only appropriate around doors and windows within masonry walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. | - exterior siding material shall be smooth-faced cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner.| hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | walkways driveways and parking pads | - walkway shall be concrete. | - driveway is not approved.| general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 08302011100

Permit #: HCN 201200050

Contractor: Ieg Electric, Llc

Date: Apr 11, 2012

Permit type: Windows

Description: To make general repairs also reroof add new windows etc; ***pursuant to ordinance no 2006-1263 of the metropolitan code of laws, i, holder of this permit, hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code

Fee: $157.71 paid to City of Nashville, Tennessee

Client: Charity Mission For Christ

Parcel #: 07007008303

Permit #: CARR 201209937

Contractor: Clearline Networks Llc

Date: Apr 20, 2012

Permit type: Windows

Description: To rehab the basement area and main floor areas for matt sims office space. also rehab storefront windows. no increase to bldg footprint. pursuant to ordinance no. 2006-1263 of the metropolitan code of laws i (the holder on this permit) hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction and demolition waste shall be stored on the property in violation of any provision of the metropolitan code.

Fee: $76.76 paid to City of Nashville, Tennessee

Parcel #: 09309010300

Permit #: CALV 201210973

Contractor: Mr. Roof Nashville, Llc

Date: Apr 30, 2012

Permit type: Windows

Description: Install window in attached garage at sgl fam res. ***pursuant to ordinance no 2008-1263 of the metropolitan code of laws, i , holder of this permit, hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code

Fee: $55.12 paid to City of Nashville, Tennessee

Client: Fares, Adel & Gebraeeal, Eman K.

Parcel #: 135100C05200CO

Permit #: CARR 201212029

Contractor: Home Tech

Date: May 16, 2012

Permit type: Windows

Description: To make general repairs also reroof add new windows etc; ***pursuant to ordinance no 2006-1263 of the metropolitan code of laws i holder of this permit hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code***.

Fee: $121.76 paid to City of Nashville, Tennessee

Parcel #: 07007008303

Permit #: CAEL 201212421

Contractor: Mid South Aluminum Co Inc

Date: Jun 13, 2012

Permit type: Windows

Description: To construct a new 18 x 15 sunroom attached to rear of res. see plan. sides min---- see plan. rear min 20'. and exterior siding and windows. . pursuant ordinance # 2006-1263 metropolitan code of laws i (the holder on this permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metropolitan code.

Fee: $243.10 paid to City of Nashville, Tennessee

Parcel #: 172120B27400CO

Permit #: CARA 201217199

Date: Jun 21, 2012

Permit type: Windows

Description: Addition partial demolition renovations & setback reduction| description| | foundation| - foundation walls shall be inset from the existing structure as noted on the site plan. | - exterior foundation material shall exactly match the existing structure or be constructed of split-face block. | - foundation height shall match the existing house. | structure | - primary ridge height shall be at least 2" below the ridge of the existing house. | roofing| - roofing material shall be asphalt composite shingles. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood with single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. | - door manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 11704026900

Permit #: HCN 201200159

Contractor: Goodall Inc Builders

Date: Jun 21, 2012

Permit type: Windows

Description: Description - demolish and reconstruct existing rear addition; construct new rear addition and side porte cochere; ridge raise. foundation - foundation walls shall be inset from the existing structure as noted on the site plan. - exterior foundation material shall exactly match the existing structure or be constructed of split-face block. - foundation height shall match the existing house. structure - ridge raise shall rise no more than two feet vertically. - ridge raise shall step in two feet from the sidewalls of the house. - primary eave height shall match or be below the eave of the existing house. -maximum ridge height shall be no more than four feet taller than the ridge of the existing house. roofing - roofing material shall be asphalt composite shingles. - gutters shall be simple metal gutters. windows & doors - windows shall be wood with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. - front door shall be restored and rear doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or bo

Client: Fruetel, Jonathan & Anne

Parcel #: 10414005100

Permit #: HCPERMIT 201200146

Date: Jun 21, 2012

Permit type: Windows

Description: | description - construct rear addition.| | foundation| - foundation walls shall be inset from the existing structure by 12" as noted on the floor plan. | - exterior foundation material shall be stuccoed to exactly match the existing structure or be constructed of split-face block. | - foundation height shall match the existing house. | structure | - primary eave height shall match the eave of the existing house. | - primary ridge height shall match the ridge of the existing house. | roofing| - roofing material shall be asphalt composite shingles. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood aluminum-clad or fiberglass with single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 08309046000

Permit #: HCN 201200150

Date: Jun 21, 2012

Permit type: Windows

Description: | description| - demolish and reconstruct existing rear addition; construct new rear addition and side porte cochere; ridge raise.| foundation| - foundation walls shall be inset from the existing structure as noted on the site plan. | - exterior foundation material shall exactly match the existing structure or be constructed of split-face block. | - foundation height shall match the existing house. | structure | - ridge raise shall rise no more than two feet vertically. | - ridge raise shall step in two feet from the sidewalls of the house. | - primary eave height shall match or be below the eave of the existing house. | -maximum ridge height shall be no more than four feet taller than the ridge of the existing house. | roofing| - roofing material shall be asphalt composite shingles. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood with single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. | - front door shall be restored and rear doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 10414005100

Permit #: HCN 201200146

Contractor: Donelson Plumbing Company

Date: Jun 21, 2012

Permit type: Windows

Description: Description - construct rear addition. foundation - foundation walls shall be inset from the existing structure by 12" as noted on the floor plan. - exterior foundation material shall be stuccoed to exactly match the existing structure or be constructed of split-face block. - foundation height shall match the existing house. structure - primary eave height shall match the eave of the existing house. - primary ridge height shall match the ridge of the existing house. roofing - roofing material shall be asphalt composite shingles. - gutters shall be simple metal gutters. windows & doors - windows shall be wood, aluminum-clad, or fiberglass with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements

Client: Moore, Matthew Rodney & Callie Stydahar

Parcel #: 08309046000

Permit #: HCPERMIT 201200150

Contractor: Goodall Inc Builders

Date: Jun 21, 2012

Permit type: Windows

Description: Addition, partial demolition, renovations & setback reduction description foundation - foundation walls shall be inset from the existing structure as noted on the site plan. - exterior foundation material shall exactly match the existing structure or be constructed of split-face block. - foundation height shall match the existing house. structure - primary ridge height shall be at least 2" below the ridge of the existing house. roofing - roofing material shall be asphalt composite shingles. - gutters shall be simple metal gutters. windows & doors - windows shall be wood with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - al

Client: Barnes, David & Ann M.

Parcel #: 11704026900

Permit #: HCPERMIT 201200159

Contractor: Tsg, Llc

Date: Jun 26, 2012

Permit type: Windows

Description: To replace siding on existing residence and install stone to exisitng residene and replace windows no change to footprint***pursuant to ordinance no 2006-1263 of the metropolitan code of laws, i, holder of this permit, hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code

Fee: $53.85 paid to City of Nashville, Tennessee

Client: Mata, Jose A. Torres

Parcel #: 13613008400

Permit #: CARR 201218660

Contractor: Roberto Martinez & C Moreno/Allegis Plum

Date: Jul 19, 2012

Permit type: Windows

Description: Description - construct new primary residence and detached accessory structure. foundation - exterior foundation material shall be split-face block. - foundation height along the street facing wall shall be a maximum of 24 inches at the highest point. structure - primary structure's eave height from the foundation shall be a maximum of 9 feet, 4 inches. - primary structure's ridge height from the foundation shall be a maximum of 28 feet, 6 inches. - accessory structure's eave height from grade shall be a maximum of 9 feet, 2 inches. - accessory structure's ridge height from grade shall be a maximum of 21 feet, 10 inches. roofing - roofing material shall be composite asphalt shingles. - roofing color must be approved by mhzc staff prior to installation. - gutters shall be simple metal gutters. windows & doors - windows shall be wood with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. - doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. - exterior siding material shall be wood or smooth-faced, cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. porches and railings - staff shall approve the material for the front porch floor and steps and the

Client: Jeong, Jack

Parcel #: 10405006400

Permit #: HCPERMIT 201200175

Contractor: J. B. Electrical Engineering & Consultin

Date: Sep 10, 2012

Permit type: Windows

Description: To construct a new 18 x 15 sunroom attached to rear of res. see plan. sides min---- see plan. rear min 20'. and exterior siding and windows. . pursuant ordinance # 2006-1263 metropolitan code of laws i (the holder on this permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metropolitan code.

Fee: $75.00 paid to City of Nashville, Tennessee

Parcel #: 172120B27400CO

Permit #: CAEL 201226646