Windows Permits in Nashville, TN

Date: Apr 4, 2013

Permit type: Windows

Description: Review for 4/17/2013 meeting description roof - roof material to match the main structure. eave depth, profile and details to match that of the existing structure. - gutter work to match existing structure. - roof ridgeline to be below the level of the ridgeline of the main structure. location - dormer to be constructed on roof so that structure sits back a minimum of 24 inches from the wall of the floor below. windows - muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. - windows on clapboard structures shall not have brick-mold. cladding & trim - trim and cladding shall be wood or cement fiberboard with a smooth face, void of any simulated wood grain pattern or rough, unfinished appearance. simulated wood stamp is not appropriate. - all exposed exterior lumber should be grade number #1 or #2. lower grade lumber is unsuitable for exterior work. - if cladding material/exposure does not match the main structure, then lap siding to be 6-width material with a maximum of 5 inches of exposure. - 2 x 4 inches wood corner boards are typical on the face of each exposed corner. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. - 2 x 4 inches wood casing typical at doors and windows. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy w

Client: Einstein, Emily & Hill, Adam

Parcel #: 10414004700

Permit #: HCPERMIT T201300120

Date: Apr 8, 2013

Permit type: Windows

Description: | description| - construct new infill and accessory structure.| roofing | - roofing material shall be composite asphalt shingles. | - roofing color must be approved by mhzc staff prior to installation. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood or aluminum clad wood windows with single-light or fully-simulated divided-light sashes. muntins are to be factory installed |with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. for double or triple windows there shall be a 4" to 6" mullion between. | - doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. | - garage vehicular and pedestrian doors may be steel with a simple panel design. | - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. | - wood brick mold is only appropriate around doors and windows within masonry walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. | - exterior siding material shall be wood or smooth-faced cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner.| hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | walkways driveways and parking pads | - walkway shall be concrete. | - the driveway shall be concrete strips as shown on the site plan. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | ||approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 08314028100

Permit #: HCN 201300077

Contractor: Precision Plumbing, Inc

Date: Apr 19, 2013

Permit type: Windows

Description: Description - construct duplex infill roofing - roofing material shall be composite asphalt shingles. - roofing color must be approved by mhzc staff prior to installation. - gutters shall be simple metal gutters. windows & doors - windows shall be wood or aluminum clad wood windows with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. for double or triple windows, there shall be a 4" to 6" mullion between. - doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. - wood brick mold is only appropriate around doors and windows within masonry walls. - windows on clapboard structures shall not have brick-mold. siding & trim - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. - exterior siding material shall be wood or smooth-faced, cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. walkways, driveways and parking pads - walkway shall be concrete. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawi

Client: Acklen Park Dr Cottages, Llc

Parcel #: 10405043200

Permit #: HCPERMIT 201300113

Date: Apr 19, 2013

Permit type: Windows

Description: | description| - construct dupleinfill| roofing | - roofing material shall be composite asphalt shingles. | - roofing color must be approved by mhzc staff prior to installation. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood or aluminum clad wood windows with single-light or fully-simulated divided-light sashes. muntins are to be factory installed |with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. for double or triple windows there shall be a 4" to 6" mullion between. | - doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. | - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. | - wood brick mold is only appropriate around doors and windows within masonry walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. | - exterior siding material shall be wood or smooth-faced cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner.| hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | walkways driveways and parking pads | - walkway shall be concrete. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | ||approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 10405043200H1

Permit #: HCN 201300113

Date: Apr 23, 2013

Permit type: Windows

Description: Construct side and rear addition| description| | roofing| - roofing material shall be asphalt composite shingles. color shall match existing or if not it shall be approved by the mhzc prior to purchase. | - gutters shall be simple metal gutters. | windows & doors| - windows shall have single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. | - door manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | - removal of cladding windows and roofing on the existing building all-together is partial-demolition and must be reviewed by the mhzc prior to work taking place. | - approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 08309046400

Permit #: HCN 201300106

Contractor: Precision Plumbing, Inc

Date: Apr 23, 2013

Permit type: Windows

Description: Construct side and rear addition description roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project.

Client: Prest, Christopher & Jessica

Parcel #: 08309046400

Permit #: HCPERMIT 201300106

Contractor: Pro Systems Inc

Date: Apr 25, 2013

Permit type: Windows

Description: Exterior renovation and restoration of a historic 1940s wpa building used for maintenance vehicles. new roof window restoration asbestos and lead based paint abatement and demolition are included in this contract. exterior work only plus interior and exterior demolition. interior work is submitted under a different scope. ***pursuant to ordinance no 2008-1263 of the metropolitan code of laws i holder of this permit hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code***.

Fee: $419.53 paid to City of Nashville, Tennessee

Parcel #: 09311010500

Permit #: CALV 201312187

Contractor: Sexton Plumbing Co. Inc.

Date: May 16, 2013

Permit type: Windows

Description: Being reviewed by staff for 5/15 meeting description cladding & trim - all/any trim, railings, vents and associated type elements are to be wood or cement fiberboard. clad material is not approved. wood or cement fiberboard shall be a smooth face material void of any simulated wood grain pattern or rough, unfinished appearance. all exposed exterior lumber should be grade number #1 or #2. lower grade lumber is unsuitable for exterior work. - 2 x 4 inches wood corner boards are typical on the face of each exposed corner, except for masonry buildings. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. - 2 x 4 inches wood casing typical at doors and windows, except for masonry buildings. double and triple windows should have a 4" to 6" mullion between. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. windows & doors - if there are muntins, only factory installed muntins are approved. self installed snap, clip or glue type muntins on windows are not approved. interior type muntins on windows are not approved. windows to be approved by staff prior to installation. - windows on clapboard structures shall not have brick-mold. - overhead garage door and pedestrian entry doors may be steel with simple panel design. doors to be approved by staff prior to installation. roof - roof material may match the main structure. if roof material is not to match main structure, then color to be approved by staff prior to installation. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field ch

Client: Barnes, David & Ann M.

Parcel #: 11704026900

Permit #: HCPERMIT 201300044

Contractor: Merrymann-Farr, Llc

Date: May 30, 2013

Permit type: Windows

Description: Description - construct rear screened porch addition. roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows - all openings shall contain screens. siding & trim - structure shall be wood. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. - removal of cladding, windows and roofing on the existing building all-together is partial-demolition and must be reviewed by the mhzc prior to work taking place. approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500.

Client: Swiggart, William H., Iv Et Ux

Parcel #: 10414008100

Permit #: HCPERMIT 201300183

Date: Jun 14, 2013

Permit type: Windows

Description: | description| - construct rear addition and ridge raise.| roofing| - roofing material shall be asphalt composite shingles. color shall match existing or if not it shall be approved by the mhzc prior to purchase. | - gutters shall be simple metal gutters. | windows & doors| - windows shall have single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. | - door manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | - removal of cladding windows and roofing on the existing building all-together is partial-demolition and must be reviewed by the mhzc prior to work taking place. | |approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 11704022400

Permit #: HCN 201300075

Contractor: Mckenzie Construction, Llc.

Date: Jun 14, 2013

Permit type: Windows

Description: Description - construct rear addition and ridge raise. roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with

Client: Morris, Kevin A. & Wendy M.

Parcel #: 11704022400

Permit #: HCPERMIT 201300075

Contractor: Sexton Plumbing Co. Inc.

Date: Jun 19, 2013

Permit type: Windows

Description: - demolish outbuilding; construct new outbuilding. description demolition - non-contributing outbuilding to be demolished. cladding & trim - all/any trim, railings, vents and associated type elements are to be wood or cement fiberboard. clad material is not approved. wood or cement fiberboard shall be a smooth face material void of any simulated wood grain pattern or rough, unfinished appearance. all exposed exterior lumber should be grade number #1 or #2. lower grade lumber is unsuitable for exterior work. - 2 x 4 inches wood corner boards are typical on the face of each exposed corner, except for masonry buildings. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. - 2 x 4 inches wood casing typical at doors and windows, except for masonry buildings. double and triple windows should have a 4" to 6" mullion between. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. windows & doors - window and pedestrian door material to be approved by staff prior to installation. - if there are muntins, only factory installed muntins are approved. self installed snap, clip or glue type muntins on windows are not approved. interior type muntins on windows are not approved. - windows on clapboard structures shall not have brick-mold. - overhead garage door shall have a double "carriage-house" style appearance. doors to be approved by staff prior to installation. roof - roof material may match the main structure. if roof material is not to match main structure, then color to be approved by staff prior to installation. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings.

Client: Sneed, William Barry & Cynthia Herring

Parcel #: 08305026200

Permit #: HCPERMIT 201300215

Contractor: Benchmark Plumbing, Inc.

Date: Jun 20, 2013

Permit type: Windows

Description: Add rear and side dormers description roof - roof material to match the main structure. eave depth, profile and details to match that of the existing structure. - gutter work to match existing structure. - roof ridgeline to be below the level of the ridgeline of the main structure. location - dormer to be constructed on roof so that structure sits back a minimum of 24 inches from the wall of the floor below. windows - muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. - windows on clapboard structures shall not have brick-mold. cladding & trim - trim and cladding shall be wood or cement fiberboard with a smooth face, void of any simulated wood grain pattern or rough, unfinished appearance. simulated wood stamp is not appropriate. - all exposed exterior lumber should be grade number #1 or #2. lower grade lumber is unsuitable for exterior work. - if cladding material/exposure does not match the main structure, then lap siding to be 6-width material with a maximum of 5 inches of exposure. - 2 x 4 inches wood corner boards are typical on the face of each exposed corner. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. - 2 x 4 inches wood casing typical at doors and windows. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with

Client: Many, Charles P. & Zahn, Robert W.

Parcel #: 08310020900

Permit #: HCPERMIT 201300199

Date: Jun 20, 2013

Permit type: Windows

Description: Add rear and side dormers| description| | roof| - roof material to match the main structure. eave depth profile and details to match that of the existing structure. | - gutter work to match existing structure. | - roof ridgeline to be below the level of the ridgeline of the main structure. | location| - dormer to be constructed on roof so that structure sits back a minimum of 24 inches from the wall of the floor below. | windows| - muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. | - windows on clapboard structures shall not have brick-mold. | cladding & trim| - trim and cladding shall be wood or cement fiberboard with a smooth face void of any simulated wood grain pattern or rough unfinished appearance. simulated wood stamp is not appropriate. | - all exposed exterior lumber should be grade number #1 or #2. lower grade lumber is unsuitable for exterior work. | - if cladding material/exposure does not match the main structure then lap siding to be 6-width material with a maximum of 5 inches of exposure. | - 2 4 inches wood corner boards are typical on the face of each exposed corner. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. | - 2 4 inches wood casing typical at doors and windows. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 08310020900

Permit #: HCN 201300199

Contractor: Metro Construction Rehab Inc

Date: Jun 25, 2013

Permit type: Windows

Description: Install windows and doors to existing sgl. family res. ***pursuant to ordinance no 2008-1263 of the metropolitan code of laws, i , holder of this permit, hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code

Valuation: $3,033,600

Parcel #: 131050C10100CO

Permit #: 201319571

Contractor: Andrew Thompson Construction

Date: Jul 26, 2013

Permit type: Windows

Description: Renovations to exterior to consist of installing some windows and to construct a cover over existing front stoop....see plan....inset door.... pursuant ordinance # 2006-1263 metropolitan code of laws, i (the holder on this permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metropolitan code...

Valuation: $2,600,000

Parcel #: 12910004100

Permit #: 201323240

Contractor: Cary Electric

Date: Aug 1, 2013

Permit type: Windows

Description: Construct 22'x22' detached garage approx. 15' tall hardie board siding3 tab shingles gutters & downspouts 60a electric service 1-3.0 walk door 1-3.0x3.0 window and 1- 16'x 7' insulated ohd. not to be used for living or commercial purposes. maallowed height is 16'. 3' min side s/b; 10' min rear s/b per easement on recorded sub plat. need to record instrument for trade permits. pursuant to ordinance no. 2006-1263 of the metropolitan code of laws i (the holder on this permit) hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction and demolition waste shall be stored on the property in violation of any provision of the metropolitan code.

Fee: $75.00 paid to City of Nashville, Tennessee

Client: Reed Rodney & Debora

Parcel #: 09611007300

Permit #: CAEL 201323838

Contractor: Krueger Construction

Date: Aug 23, 2013

Permit type: Windows

Description: To install two (2) skylights and one (1) window on rear accessory bldg. (garage). this permit to comply with mhzc approvals. ***pursuant to ordinance no 2008-1263 of the metropolitan code of laws, i , holder of this permit, hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code

Valuation: $410,000

Parcel #: 11704020200

Permit #: 201326450

Contractor: Krueger Construction

Date: Aug 23, 2013

Permit type: Windows

Description: To install two (2) skylights and one (1) window on rear accessory bldg. (garage). this permit to comply with mhzc approvals. ***pursuant to ordinance no 2008-1263 of the metropolitan code of laws i holder of this permit hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code***.

Fee: $71.16 paid to City of Nashville, Tennessee

Parcel #: 11704020200

Permit #: CARN 201326450

Contractor: Walker, Michael J

Date: Sep 11, 2013

Permit type: Windows

Description: Construct 14' 18' screen porch and 2' 6' bay window on rear of sgl fam res. 10' min side - 20' min rear setbacks. ***pursuant to ordinance no 2008-1263 of the metropolitan code of laws i holder of this permit hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code***.

Fee: $76.72 paid to City of Nashville, Tennessee

Parcel #: 16003013000

Permit #: CAEL 201328307