Windows Permits in Nashville, TN

Contractor: Ole South Properties, Inc.

Date: Apr 7, 2014

Permit type: Windows

Description: Description - demolish existing addition; construct new addition roofing - roofing material shall rubber membrane and metal. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing

Client: Collins, Mary Helen

Parcel #: 10308020500

Permit #: HCPERMIT 201400126

Date: Apr 25, 2014

Permit type: Windows

Description: To rehab interior and exterior of existing sgl. family residential structure. to include replacing windows and floor covering material. *no change in footprint this permit. ***pursuant to ordinance no 2008-1263 of the metropolitan code of laws, i , holder of this permit, hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code

Valuation: $700,000

Parcel #: 04313036200

Permit #: 201414213

Contractor: Air Systems, Inc.

Date: Apr 25, 2014

Permit type: Windows

Description: To rehab interior and exterior of existing sgl. family residential structure. to include replacing windows and floor covering material. *no change in footprint this permit. ***pursuant to ordinance no 2008-1263 of the metropolitan code of laws, i , holder of this permit, hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code

Fee: $82.70 paid to City of Nashville, Tennessee

Client: Baugher, William L.

Parcel #: 04313036200

Permit #: CARR 201414213

Contractor: Ellis Rader

Date: May 6, 2014

Permit type: Windows

Description: Description enclose existing rear porch. window and door replacement. patch brick veneer to match existing. roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should

Client: Johnson, Joseph D., Jr. & Melissa A.

Parcel #: 13002006500

Permit #: HCPERMIT 201400167

Contractor: Bob Farrar Builders, Inc

Date: Jun 2, 2014

Permit type: Windows

Description: to rehab exterior of existing no res. bldg. to include removing two (2) front windows and replacing openings with solid exterior coverings. * no change in footprint this permit.***pursuant to ordinance no 2008-1263 of the metropolitan code of laws, i , holder of this permit, hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no struction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code

Valuation: $520,000

Parcel #: 09605013300

Permit #: 201418913

Date: Jun 10, 2014

Permit type: Windows

Description: One story rear addition to two-story house.| roofing| - roofing material shall be asphalt composite shingles. color shall match existing or if not it shall be approved by the mhzc prior to purchase. | - gutters shall be simple metal gutters. | windows & doors| - windows shall have single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. | - door manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | - removal of cladding windows and roofing on the existing building all-together is partial-demolition and must be reviewed by the mhzc prior to work taking place. | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 10410004900

Permit #: HCN 201400221

Contractor: G & M Plumbing Company

Date: Jun 10, 2014

Permit type: Windows

Description: One story rear addition to two-story house. roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project.

Client: Mistler, John G. & Debra S.

Parcel #: 10410004900

Permit #: HCPERMIT 201400221

Contractor: Shane Electric, Llc

Date: Jul 11, 2014

Permit type: Windows

Description: Move riser past window 3 feet-electrical permit 201420794 nes work order# 1407010551.

Fee: $102.30 paid to City of Nashville, Tennessee

Parcel #: 10310011500

Permit #: CAEL 201424728

Contractor: L & R Plumbing Llc

Date: Jul 17, 2014

Permit type: Windows

Description: Description - construct addition and outbuilding; setback determination roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to

Client: Adams, Roland J.

Parcel #: 08305025700

Permit #: HCPERMIT 201400242

Date: Jul 17, 2014

Permit type: Windows

Description: | description| - construct addition and outbuilding; setback determination| roofing| - roofing material shall be asphalt composite shingles. color shall match existing or if not it shall be approved by the mhzc prior to purchase. | - gutters shall be simple metal gutters. | windows & doors| - windows shall have single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. | - door manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | - removal of cladding windows and roofing on the existing building all-together is partial-demolition and must be reviewed by the mhzc prior to work taking place. | |approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 08305025700

Permit #: HCN 201400242

Contractor: Joslin Sign And Maintenance Co Inc

Date: Aug 4, 2014

Permit type: Windows

Description: Sign permit for morgan and morgan.*this permit 1. projection sign at 2'2" x 20'.not to extend over public sidewalk.projection sign--no other projection signs on this facade and no other within 25'.located below window sills of 4th fl.5 story bldg.12" spacing from facade.depth of cabinet max 18". illumination: illumination: background must be opaque.only graphics text and logos may be illuminated and a halo of one inch around graphics text and logos may be non-opaque.both transitional streets.nothing to extend over public right of way. 2.dtc approved under t2014-21179.to place one illuminated wall sign. 11" 15' wall sign for morgan & morgan.need to comply with pc approved plans.dtc the revised drawings dated 6/23/14 are approved with the smaller horizontal wall sign per the dtc sign standards along 9th ave. facade. ul# hd779199-200. wall at 65x1.5=97.using 15 sqft and 45 sqft.these are the only signs on this bldg facing broadway.see plan.

Fee: $198.00 paid to City of Nashville, Tennessee

Parcel #: 09305404100

Permit #: CASN 201422983

Contractor: Joslin Sign And Maintenance Co Inc

Date: Aug 4, 2014

Permit type: Windows

Description: Sign permit for morgan and morgan....*this permit1.. projection sign at 2'2" x 20'......not to extend over public sidewalk....projection sign--no other projection signs on this facade and no other within 25'...located below window sills of 4th fl.....5 story bldg....12" spacing from facade...depth of cabinet max 18".... illumination: illumination: background must be opaque...only graphics, text and logos may be illuminated and a halo of one inch around graphics, text, and logos may be non-opaque....both transitional streets....nothing to extend over public right of way.2....dtc approved under t2014-21179.....to place one illuminated wall sign. 11" x 15' wall sign for morgan & morgan.....need to comply with pc approved plans...dtc, the revised drawings dated 6/23/14 are approved with the smaller horizontal wall sign per the dtc sign standards along 9th ave. facade. ul# hd779199-200.wall at 65x1.5=97..using 15 sqft and 45 sqft...these are the only signs on this bldg facing broadway....see plan..

Valuation: $2,500,000

Parcel #: 09305404100

Permit #: 201422983

Contractor: Joslin Sign And Maintenance Co Inc

Date: Aug 4, 2014

Permit type: Windows

Description: Sign permit for morgan and morgan.*this permit 1. projection sign at 2'2" x 20'.not to extend over public sidewalk.projection sign--no other projection signs on this facade and no other within 25'.located below window sills of 4th fl.5 story bldg.12" spacing from facade.depth of cabinet max 18". illumination: illumination: background must be opaque.only graphics text and logos may be illuminated and a halo of one inch around graphics text and logos may be non-opaque.both transitional streets.nothing to extend over public right of way. 2.dtc approved under t2014-21179.to place one illuminated wall sign. 11" 15' wall sign for morgan & morgan.need to comply with pc approved plans.dtc the revised drawings dated 6/23/14 are approved with the smaller horizontal wall sign per the dtc sign standards along 9th ave. facade. ul# hd779199-200. wall at 65x1.5=97.using 15 sqft and 45 sqft.these are the only signs on this bldg facing broadway.see plan.

Fee: $75.00 paid to City of Nashville, Tennessee

Parcel #: 09305404100

Permit #: CAES 201427922

Contractor: Joslin Sign And Maintenance Co Inc

Date: Aug 14, 2014

Permit type: Windows

Description: To install new exterior siding & trim to existing sgl. family res. ** no change in footprint this permit. this permit to include installing two (2) new windows on accessory garage. pursuant # 2006-1263 metro code of laws, i (holder of permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metro code.; for every 30 feet of street frontage, or fraction thereof, one 2 inch caliper tree as listed in the urban forestry approved tree list shall be planted on the subject property.

Fee: $128.86 paid to City of Nashville, Tennessee

Client: Brown, Tammy R.

Parcel #: 11906004700

Permit #: CARK 201429414

Date: Aug 21, 2014

Permit type: Windows

Description: | description| - demolish existing non-contributing structure; construct new dupleinfill and garagel.| roofing | - roofing material shall be composite asphalt shingles. | - roofing color must be approved by mhzc staff prior to installation. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood or aluminum clad wood windows with single-light or fully-simulated divided-light sashes. muntins are to be factory installed |with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. for double or triple windows there shall be a 4" to 6" mullion between. | - doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. | - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. | - wood brick mold is only appropriate around doors and windows within masonry walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. | - exterior siding material shall be wood or smooth-faced cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner.| hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | walkways driveways and parking pads | - walkway shall be concrete. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | ||approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 08302028300H1

Permit #: HCN 201400290

Date: Aug 21, 2014

Permit type: Windows

Description: | description| build screened porch at rear of house in accordance with attached plans.| roofing| - roofing material shall be asphalt composite shingles. color shall match existing or if not it shall be approved by the mhzc prior to purchase. | - gutters shall be simple metal gutters. | windows & doors| - windows shall have single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. | - door manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | - removal of cladding windows and roofing on the existing building all-together is partial-demolition and must be reviewed by the mhzc prior to work taking place. | |approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 10312026400

Permit #: HCN 201400322

Contractor: Joslin Sign And Maintenance Co Inc

Date: Aug 21, 2014

Permit type: Windows

Description: Description build screened porch at rear of house in accordance with attached plans. roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc sta

Client: Blake, Mary Anne & Rogers, Judson

Parcel #: 10312026400

Permit #: HCPERMIT 201400322

Contractor: G & M Plumbing Company

Date: Aug 21, 2014

Permit type: Windows

Description: Description build new single-family residence. roofing - roofing material shall be composite asphalt shingles. - roofing color must be approved by mhzc staff prior to installation. - gutters shall be simple metal gutters. windows & doors - windows shall be wood or aluminum clad wood windows with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. for double or triple windows, there shall be a 4" to 6" mullion between. - doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. - wood brick mold is only appropriate around doors and windows within masonry walls. - windows on clapboard structures shall not have brick-mold. siding & trim - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. - exterior siding material shall be wood or smooth-faced, cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. walkways, driveways and parking pads - walkway shall be concrete. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitte

Client: Element Ventures, Llc

Parcel #: 08305045100

Permit #: HCPERMIT 201400285

Contractor: Titan Electric, Llc.

Date: Aug 22, 2014

Permit type: Windows

Description: To construct a new single family res at 3558 sqft with attached garage at 501 with 326 porches.this is one of two single family houses on this property.split from 131-3-237.lot size 15045 sqft.coverage at 35%.garage doors face each other.see plan.max ht at 3 stories and 45'.pursuant ordinance # 2006-1263 metropolitan code of laws i (the holder on this permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metropolitan code. *********************************************site plan sent to file. per plat note 5--- min ffe 596.5 also baywindows not allowed to encroach in setbacks.

Fee: $76.73 paid to City of Nashville, Tennessee

Parcel #: 13103023700H1

Permit #: CAEL 201430552

Contractor: Titan Electric, Llc.

Date: Aug 27, 2014

Permit type: Windows

Description: Description - construct rear addition roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project.

Client: Moore, Matthew Rodney & Callie Stydahar

Parcel #: 08309046000

Permit #: HCPERMIT 201400329