Windows Permits in Nashville, TN

Contractor: Huffine First Service

Date: Jan 4, 2015

Permit type: Windows

Description: Full wiring pursuant # 2006-1263 metro code of laws i (holder of permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metro code: for every 30 feet of street frontage or fraction thereof one 2 inch caliper tree as listed in the urban forestry approved tree list shall be planted on the subject property. ***to construct a new single family unit at 1842 sqft with attached 400 carport and porch. max ht 40'.from natural grade to very top on all sides.this one of two single family units under one roof.split from 83-7-149.(est 1956 under deed 2602/577.then then 3 lot plat-- lot 1 parcel 364. then condo #'s.front facade to face tillman.front setback min 60' including porches.side min 5'.side street min 20'.rear min 20'.see plan.baywindows cannot extend into setbacks.see site plan for driveway locations.plan sent to file.

Fee: $138.05 paid to City of Nashville, Tennessee

Parcel #: 083070K00100CO

Permit #: CAEL 201500106

Date: Jan 6, 2015

Permit type: Windows

Description: Build new residence in accordance with attached drawings.| | roofing | - roofing material shall be composite asphalt shingles. | - roofing color must be approved by mhzc staff prior to installation. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood or aluminum clad wood windows with single-light or fully-simulated divided-light sashes. muntins are to be factory installed |with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. for double or triple windows there shall be a 4" to 6" mullion between. | - doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. | - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. | - wood brick mold is only appropriate around doors and windows within masonry walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. | - exterior siding material shall be wood or smooth-faced cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner.| hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | walkways driveways and parking pads | - walkway shall be concrete. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | ||approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 08302036200

Permit #: HCN 201400374

Contractor: Precision Plumbing, Inc

Date: Jan 16, 2015

Permit type: Windows

Description: To conduct rehab work to the outside of existing residence including siding and windows. pursuant # 2006-1263 metro code of laws, i (holder of permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further, i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metro code.

Fee: $78.70 paid to City of Nashville, Tennessee

Client: Stanard, Ray D. & Margaret D.

Parcel #: 07206035900

Permit #: CARR 201501804

Contractor: Precision Plumbing, Inc

Date: Jan 20, 2015

Permit type: Windows

Description: Construct ridge raise and first story rear addition. description - front roof plane to be extended, increasing the height by two feet (2'). - two feet on existing roof on each side of roof to remain unaltered. - first story addition to sit in one foot (1') from existing house on each side. roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall be one-over-one double hung. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the ap

Client: Westling, Richard W. & Bronwyn

Parcel #: 08310007000

Permit #: HCPERMIT 201500037

Contractor: Rafael Yescas Abascal

Date: Jan 27, 2015

Permit type: Windows

Description: Rewire one light and one switch and replace the box for a a/c window unit at each of 27 guest rooms front wall units from 117 to 131 and 221 thru 232 remodel interior/exterior of family inns of america. no change to footprint. ***pursuant to ordinance no 2008-1263 of the metropolitan code of laws i holder of this permit hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction or demolition waste shall be stored on the property in violation of any provisions of the metropolitan code***.

Fee: $76.73 paid to City of Nashville, Tennessee

Parcel #: 09713002600

Permit #: CAEL 201503110

Contractor: Summit Constructors, Inc.

Date: Feb 6, 2015

Permit type: Windows

Description: Construction of outbuilding. cladding & trim - all/any trim, railings, vents and associated type elements are to be wood or cement fiberboard. clad material is not approved. wood or cement fiberboard shall be a smooth face material void of any simulated wood grain pattern or rough, unfinished appearance. all exposed exterior lumber should be grade number #1 or #2. lower grade lumber is unsuitable for exterior work. - 2 x 4 inches wood corner boards are typical on the face of each exposed corner, except for masonry buildings. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. - 2 x 4 inches wood casing typical at doors and windows, except for masonry buildings. double and triple windows should have a 4" to 6" mullion between. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. windows & doors - if there are muntins, only factory installed muntins are approved. self installed snap, clip or glue type muntins on windows are not approved. interior type muntins on windows are not approved. windows to be approved by staff prior to installation. - windows on clapboard structures shall not have brick-mold. - overhead garage door and pedestrian entry doors may be steel with simple panel design. doors to be approved by staff prior to installation. roof - roof material may match the main structure. if roof material is not to match main structure, then color to be approved by staff prior to installation. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with

Client: 1907 Benjamin Land Trust, The

Parcel #: 08302036200

Permit #: HCPERMIT 201500007

Contractor: L & R Plumbing Llc

Date: Mar 3, 2015

Permit type: Windows

Description: Pursuant # 2006-1263 metro code of laws i (holder of permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metro code: for every 30 feet of street frontage or fraction thereof one 2 inch caliper tree as listed in the urban forestry approved tree list shall be planted on the subject property. ***to construct a new single family unit at 1842 sqft with attached 400 carport and porch. max ht 40'.from natural grade to very top on all sides.this one of two single family units under one roof.split from 83-7-149.(est 1956 under deed 2602/577.then then 3 lot plat-- lot 1 parcel 364. then condo #'s.front facade to face tillman.front setback min 60' including porches.side min 5'.side street min 20'.rear min 20'.see plan.baywindows cannot extend into setbacks.see site plan for driveway locations.plan sent to file.

Fee: $157.54 paid to City of Nashville, Tennessee

Parcel #: 083070K00100CO

Permit #: CAPL 201507742

Contractor: Madison Contractors, Inc.

Date: Mar 3, 2015

Permit type: Windows

Description: Construct new single-family house. roofing - roofing material shall be composite asphalt shingles. - roofing color must be approved by mhzc staff prior to installation. - gutters shall be simple metal gutters. windows & doors - windows shall be wood or aluminum clad wood windows with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. for double or triple windows, there shall be a 4" to 6" mullion between. - doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. - wood brick mold is only appropriate around doors and windows within masonry walls. - windows on clapboard structures shall not have brick-mold. siding & trim - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. - exterior siding material shall be wood or smooth-faced, cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. walkways, driveways and parking pads - walkway shall be concrete. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings.

Client: Smith, Daniel

Parcel #: 08204027700

Permit #: HCPERMIT 201500073

Contractor: Gaines Construction Co Llc

Date: Mar 3, 2015

Permit type: Windows

Description: Description - construct addition and alter roof to non-contributing structure roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff pri

Client: Lessnau, Kathryn Sanders Beesley

Parcel #: 10312020100

Permit #: HCPERMIT T201500104

Contractor: Kudzu Real Estate, Inc.

Date: Mar 3, 2015

Permit type: Windows

Description: Construct new single-family house.| roofing | - roofing material shall be composite asphalt shingles. | - roofing color must be approved by mhzc staff prior to installation. | - gutters shall be simple metal gutters. | windows & doors| - windows shall be wood or aluminum clad wood windows with single-light or fully-simulated divided-light sashes. muntins are to be factory installed |with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. for double or triple windows there shall be a 4" to 6" mullion between. | - doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. | - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. | - wood brick mold is only appropriate around doors and windows within masonry walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. | - exterior siding material shall be wood or smooth-faced cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner.| hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | walkways driveways and parking pads | - walkway shall be concrete. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 08204027700

Permit #: HCN 201500073

Contractor: Lanham, Jerry T

Date: Mar 17, 2015

Permit type: Windows

Description: Per mhzc preservation permit 201400432 to construct a rear addition to residence with 1292 sf living area and install replacement windows and door. remains single family residence. pursuant to ordinance no. 2006-1263 of the metropolitan code of laws i (the holder on this permit) hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction and demolition waste shall be stored on the property in violation of any provision of the metropolitan code.

Fee: $76.73 paid to City of Nashville, Tennessee

Parcel #: 10308018600

Permit #: CAGH 201509616

Contractor: Trm Construction Inc.

Date: Mar 19, 2015

Permit type: Windows

Description: Construct rear addition. roofing - roofing material shall be asphalt composite shingles. color shall match existing or if not, it shall be approved by the mhzc prior to purchase. - gutters shall be simple metal gutters. windows & doors - windows shall have single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. - door manufacturer and type must be approved by mhzc staff prior to installation. - four (4) inch (nominal) wood casings are required around doors, windows, and vents within clapboard walls. - windows on clapboard structures shall not have brick-mold. siding & trim - siding and trim shall be wood or smooth-faced, cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house, then it shall have a maximum reveal of five (5) inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. - any substitut

Client: Suarez, Moyo B.

Parcel #: 11704018400

Permit #: HCPERMIT 201500115

Contractor: Titan Electric, Llc.

Date: Mar 27, 2015

Permit type: Windows

Description: To construct a new single family res at 3548 sqft with attached garage at 503 with 326 porches.this is one of two single family houses on this property.split from 131-3-237.lot size 15045 sqft.coverage at 35%.garage doors face each other.see plan.max ht at 3 stories and 45'.pursuant ordinance # 2006-1263 metropolitan code of laws i (the holder on this permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metropolitan code. *********************************************site plan sent to file. per plat note 5--- min ffe 596.5 also baywindows not allowed to encroach in setbacks.

Fee: $76.73 paid to City of Nashville, Tennessee

Parcel #: 131033A90000CO

Permit #: CAEL 201511260

Contractor: Titan Electric, Llc.

Date: Mar 27, 2015

Permit type: Windows

Description: To construct a new single family res at 3558 sqft with attached garage at 501 with 326 porches.this is one of two single family houses on this property.split from 131-3-237.lot size 15045 sqft.coverage at 35%.garage doors face each other.see plan.max ht at 3 stories and 45'.pursuant ordinance # 2006-1263 metropolitan code of laws i (the holder on this permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metropolitan code. *********************************************site plan sent to file. per plat note 5--- min ffe 596.5 also baywindows not allowed to encroach in setbacks.

Fee: $76.73 paid to City of Nashville, Tennessee

Parcel #: 131033A00100CO

Permit #: CAEL 201511261

Contractor: Roscoe Brown Heating & Cooling Of Nashville, Inc.

Date: Mar 31, 2015

Permit type: Windows

Description: Relocate existing 2 ton airhandler located upstairs to new location in upstairs closet area.run new 10 inch supply trunkline 20 feet on new addition and add (2) 6 inch ductlines and add a 7 inch ductlline by window.reconnect all of the existing ductlines ************ forrest hills ********************.

Fee: $76.73 paid to City of Nashville, Tennessee

Parcel #: 14506003600

Permit #: CAGM 201511649

Contractor: Piedmont Natural Gas - Tennessee

Date: Apr 1, 2015

Permit type: Windows

Description: Png to remove old water heater and cap lines. png to relocate water heater in garage to front wall next to safe and vent out between two windows. png to install tankless water heater.

Fee: $76.73 paid to City of Nashville, Tennessee

Parcel #: 12814012900

Permit #: CAGA 201511829

Contractor: R & M Electric, Inc.

Date: Apr 7, 2015

Permit type: Windows

Description: Per mhzc preservation permit 201400432 to construct a rear addition to residence with 1292 sf living area and install replacement windows and door. remains single family residence. pursuant to ordinance no. 2006-1263 of the metropolitan code of laws i (the holder on this permit) hereby certify that all construction and demolition waste generated by any and all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction and demolition waste shall be stored on the property in violation of any provision of the metropolitan code.

Fee: $144.19 paid to City of Nashville, Tennessee

Parcel #: 10308018600

Permit #: CAEL 201512722

Contractor: Huffine First Service

Date: Apr 9, 2015

Permit type: Windows

Description: Ser releasepursuant # 2006-1263 metro code of laws i (holder of permit) hereby certify that all construction & demolition waste generated by any & all activities governed by this permit shall be disposed of in an approved landfill. further i certify that no construction & demolition waste shall be stored on the property in violation of any provision of metro code: for every 30 feet of street frontage or fraction thereof one 2 inch caliper tree as listed in the urban forestry approved tree list shall be planted on the subject property. ***to construct a new single family unit at 1842 sqft with attached 400 carport and porch. max ht 40'.from natural grade to very top on all sides.this one of two single family units under one roof.split from 83-7-149.(est 1956 under deed 2602/577.then then 3 lot plat-- lot 1 parcel 364. then condo #'s.front facade to face tillman.front setback min 60' including porches.side min 5'.side street min 20'.rear min 20'.see plan.baywindows cannot extend into setbacks.see site plan for driveway locations.plan sent to file.

Fee: $76.73 paid to City of Nashville, Tennessee

Parcel #: 083070K00100CO

Permit #: CAEL 201513399

Contractor: Lamberth & Sons Plumbing Co. Inc.

Date: Apr 17, 2015

Permit type: Windows

Description: Description: construction of new residence roofing - roofing material shall be composite asphalt shingles. - roofing color must be approved by mhzc staff prior to installation. - gutters shall be simple metal gutters. windows & doors - windows shall be wood or aluminum clad wood windows with single-light or fully-simulated, divided-light sashes. muntins are to be factory installed with an exterior muntin, interior muntin, and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. for double or triple windows, there shall be a 4" to 6" mullion between. - doors shall be full-light wood doors. door manufacturer and type must be approved by mhzc staff prior to installation. - 4 inches (nominal) wood casings are required around doors and windows within clapboard walls. - wood brick mold is only appropriate around doors and windows within masonry walls. - windows on clapboard structures shall not have brick-mold. siding & trim - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. - exterior siding material shall be wood or smooth-faced, cement-fiberboard siding (ex. hardiplank) with a maximum reveal of 5 inches. - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. hvac - hvac/mechanical/utility vents, pipes, lines, and all associated components, condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. walkways, driveways and parking pads - walkway shall be concrete. general specifications - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted d

Client: Haydon, Jeffrey

Parcel #: 08301019900

Permit #: HCPERMIT 201500060

Contractor: Allard Ward Architects Llc

Date: Apr 17, 2015

Permit type: Windows

Description: Construct addition to historic house; construct outbuilding.| roofing| - roofing material shall be asphalt composite shingles. color shall match existing or if not it shall be approved by the mhzc prior to purchase. | - gutters shall be simple metal gutters. | windows & doors| - windows shall have single-light or fully-simulated divided-light sashes. muntins are to be factory installed with an exterior muntin interior muntin and a spacer within the double-paned glass. window manufacturer and type must be approved by mhzc staff prior to installation. double and triple windows shall have a 4" to 6" mullion between. | - door manufacturer and type must be approved by mhzc staff prior to installation. | - four (4) inch (nominal) wood casings are required around doors windows and vents within clapboard walls. | - windows on clapboard structures shall not have brick-mold. | siding & trim| - siding and trim shall be wood or smooth-faced cement-fiberboard (e.g.: hardiplank). if siding exposure is not matched to that of the existing house then it shall have a maximum reveal of five (5) inches. | - 4 inches (nominal) wood corner-boards are required at the face of each exposed corner. | hvac | - hvac/mechanical/utility vents pipes lines and all associated components condensers or boxes shall be located behind the midpoint of the structure on a non-street facade. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | - removal of cladding windows and roofing on the existing building all-together is partial-demolition and must be reviewed by the mhzc prior to work taking place. | - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500. |.

Parcel #: 10416038700

Permit #: HCN 201500170