Contractors DirectoryInformation on every contractor in United States

Plumbing Permits in Baltimore, MD

574 Baker St, Baltimore, MD 21217

Date: Sep 20, 2010

Permit type: Plumbing

Description: Design furnish and install an automatic fire sprionkler system per nfpa 13-d and authority having jurisdiction.

Permit #: COM2010-19128

582 Baker St, Baltimore, MD 21217

Date: Sep 20, 2010

Permit type: Plumbing

Description: Design furnish and install an automatic fire sprionkler system per nfpa 13-d and authority having jurisdiction.

Permit #: COM2010-19117

572 Baker St, Baltimore, MD 21217

Date: Sep 20, 2010

Permit type: Plumbing

Description: Design, furnish & install automatic fire sprinkler system per nfpa - 13 -d and authority having jurisdiction.

Permit #: COM2010-16653

804 Belgian Ave, Baltimore, MD 21218

Date: Sep 20, 2010

Permit type: Plumbing

Description: Install new pvc waste/vent piping to 8 fixtures; install cpvc for domestic water piping; 1 electric water heater; install 1/2" tracpipe from existing gas line to 1 gas furnace (this is a fixture relocation); all work will be done as per code. hvac by others.

Permit #: COM2010-21067

566 Baker St, Baltimore, MD 21217

Date: Sep 20, 2010

Permit type: Plumbing

Description: Design, furnish & install automatic fire sprinkler system per nfpa - 13 -d and authority having jurisdiction.

Permit #: COM2010-16657

3902 Forrester Ave, Baltimore, MD 21206

Date: Sep 20, 2010

Permit type: Plumbing

Description: Install 5 plumbing fixtures; install cpvc interior water piping; install 40-gallon gas water heater (40,000 btu's); all work will be done as per code. hvac by others.

Permit #: COM2010-20990

3127 Milford Ave, Baltimore, MD 21207

Date: Sep 21, 2010

Permit type: Plumbing

Description: Replace existing exterior sewer line as per code. all work on private property. no work on right-of-way.

Permit #: COM2010-21210

5100 Falls Road, Baltimore, MD 21210

Date: Sep 21, 2010

Permit type: Plumbing

Description: Install new elevator machine room to replace existing cage.

Permit #: COM2010-20850

2912 Rockrose Ave, Baltimore, MD 21215

Date: Sep 21, 2010

Permit type: Plumbing

Description: 102,000 btu oil boiler and backflow preventer as per code

Permit #: COM2010-21197

6770 Moravia Park Dr, Baltimore, MD 21237

Date: Sep 21, 2010

Permit type: Plumbing

Description: Amend permit # com2010-19089 issued on 09/07/10 with plans # 2010-1162 to add prime, electrical & plumbing contractor as listed above original permit description:(com2010-19089) interior work: 1,900 sq ft: minor gwb partition demolition, replace existing ceiling grid, install (1) new ada restroom, install power outlets in one room see drawings as per plans as per code.

Permit #: COM2010-21204

1514 Latrobe Park Terr, Baltimore, MD 21230

Date: Sep 21, 2010

Permit type: Plumbing

Description: Reconstruct waste and water for 2 toilets, 1 shower, 1 tub, and 2 vanities. all work to be done as per code.

Permit #: COM2010-21180

3622 Cottage Ave, Baltimore, MD 21215

Date: Sep 21, 2010

Permit type: Plumbing

Description: Install 1- new tub / 1- toliet / 1- vanity / 1 kitchen sink / 1 garbage disposal / 1- dishwasher / 1 wash box and reconstruct waste & water where need as per code 1-40 gallon electric water heater as per code

Permit #: COM2010-21189

2429 Callow Ave, Baltimore, MD 21217

Date: Sep 21, 2010

Permit type: Plumbing

Description: Amend permit#com2010-20040 issued on 9-8-10 to add the following additional work: changing wording from " connect 2 existing water heaters only to " connect 2 existing a/c units" as per code. original permit description:(com2010-20040) connect 2 existing water heaters only.,connect 2 existing furnaces only. install 2 gfi/8 outlets in kitchens only., install 12 light fixtures, total 6 circuits as per code.

Permit #: COM2010-21161

4106 Buena Vista Ave, Baltimore, MD 21211

Date: Sep 21, 2010

Permit type: Plumbing

Description: Replace boiler; install backflow device; install gas pipe from meter to boiler; tie into existing electric and heat lines; all work will be done as per code.

Permit #: COM2010-21119

6303 Wirt Ave, Baltimore, MD 21215

Date: Sep 21, 2010

Permit type: Plumbing

Description: Interior work - install gas service and one stove as per code.

Permit #: COM2010-21147

3825 Copley Road, Baltimore, MD 21215

Date: Sep 21, 2010

Permit type: Plumbing

Description: Replace domestic water lines from main to 8 fixtures with new risers as per code.

Permit #: COM2010-21122

917 Allendale St, Baltimore, MD 21229

Date: Sep 21, 2010

Permit type: Plumbing

Description: 70,000 btu oil boiler and backflow preventer as per code

Permit #: COM2010-21196

2700 Seamon Ave, Baltimore, MD 21225

Date: Sep 21, 2010

Permit type: Plumbing

Description: Amend permit#com2010-18062 issued on 8-30-10 with plans#1122 to add plumber, gas and havc contractor aslisted above. original permit description:(com2010-18062) interior work: 2,518 sq. ft.; provide science lab renovation services at new era academy high school (sch. #422); jln construction services, llc shall provide labor, materials, equipment, tools, construction machinery, transportation, and other facilities and services necessary for proper execution and completion of the project as per plans and as per code.

Permit #: COM2010-21181

5503 Rusk Ave, Baltimore, MD 21215

Date: Sep 21, 2010

Permit type: Plumbing

Description: Replace 3 full baths, kitchen sink laundry hook-up reconstruction of water as per code

Permit #: COM2010-21126

125 N Culver St, Baltimore, MD 21229

Date: Sep 21, 2010

Permit type: Plumbing

Description: Cap off gas line

Permit #: MEC2010-00916

All data is collected from public records. We do not guarantee accuracy of information.