Contractors DirectoryInformation on every contractor in United States

Commercial Contracting Permits in Baltimore, MD

928 E Biddle St, Baltimore, MD 21202

Date: Aug 10, 2010

Permit type: Commercial Contracting

Description: Interior work - install 200 amp srv, (10) circuit, (25) low voltage and add one meter as per code.

Permit #: COM2010-17653

930 E Biddle St, Baltimore, MD 21202

Date: Aug 10, 2010

Permit type: Commercial Contracting

Description: Interior work - install 200 amp srv, (10) circuit, (25) low voltage and add one meter as per code.

Permit #: COM2010-17656

200 14Th Ave, Baltimore, MD 21225

Date: Aug 11, 2010

Permit type: Commercial Contracting

Description: See f/a e02234765--4 smoke det., 2 output relay modules,1 pullstation,12 horn/strobes,4door holder

Client: Anne Arundel County Bd Of Ed

Parcel #: 5047-0026-8950

Permit #: E02234766

1642 Kingsway Road, Baltimore, MD 21218

Date: Aug 11, 2010

Permit type: Commercial Contracting

Description: 100 amp line side only service cable and 3 ckts as per code.

Permit #: COM2010-17803

200 14Th Ave, Baltimore, MD 21225

Date: Aug 11, 2010

Permit type: Commercial Contracting

Description: Fire alarm rev 8/10/10 (ld)

Client: Anne Arundel County Bd Of Ed

Parcel #: 5047-0026-8950

Permit #: E02234765

909 W University Pkwy, Baltimore, MD 21210

Date: Aug 12, 2010

Permit type: Commercial Contracting

Description: Temp. utilize the curb lane for a lift

Permit #: ROW2010-03843

4542 Finney Ave, Baltimore, MD 21215

Date: Aug 12, 2010

Permit type: Commercial Contracting

Description: Temp. utilize the curb lane for a dumpster

Permit #: ROW2010-03809

301 S Beechfield Ave, Baltimore, MD 21229

Date: Aug 12, 2010

Permit type: Commercial Contracting

Description: Non-structural alterations; install fire alarm devices per approved drawing (alterations to media center); permit # com2010-07725; new fire alarm control panel with interface to existing facp 6-smoke detectors, 1 heat detector, 2 duct smoke detectors, 4 horn/strobes and 2 strobes only. all work will be done as per plans and as per code.

Permit #: COM2010-14297

518 Sanford Pl, Baltimore, MD 21217

Date: Aug 12, 2010

Permit type: Commercial Contracting

Description: Amend permit # com2010-14931 issued on 07/09/10 to add the following additional work: add 10 circuits as per code original permit description:(com2010-14931) change 100 amp panel. add 1 circuit for smoke detector . 1 meter asper code.

Permit #: COM2010-17911

1427 Kitmore Road, Baltimore, MD 21239

Date: Aug 12, 2010

Permit type: Commercial Contracting

Description: Temp. utilize the curb lane for storage container

Permit #: ROW2010-03864

410 Joplin St, Baltimore, MD 21224

Date: Aug 12, 2010

Permit type: Commercial Contracting

Description: Temp. utilize the curb lane for a storage container

Permit #: ROW2010-03851

3036 Stafford St, Baltimore, MD 21223

Date: Aug 12, 2010

Permit type: Commercial Contracting

Description: Installation of low voltage 6 burglar devices, as per code.

Permit #: COM2010-00233

447 Pitman Pl, Baltimore, MD 21202

Date: Aug 12, 2010

Permit type: Commercial Contracting

Description: Final inspection for 18 ckts and 6 low voltage, light ckt, receptacles ckts, smoke detector as per code.

Permit #: COM2010-17827

3002 Druid Park Dr, Baltimore, MD 21215

Date: Aug 12, 2010

Permit type: Commercial Contracting

Description: Overlash 24 ct fibers from pole #358515 on springhill have to pole #418527 on hilldale ave 2,100'. continue over lashing to pole #806960. install and trench 2" sche 80 conduit pipe 1, 925' south on carlins park dr. setting three large vaults. then street open trench carlins park dr. 46' continuing 370' of 2" sche 80 conduit to tower location behind 3002 druid park dr.

Permit #: ROW2010-03845

3500 Hillen Road, Baltimore, MD 21218

Date: Aug 12, 2010

Permit type: Commercial Contracting

Description: Amend permit com2009-17790, issued on 12/30/09 with plans #2009-1048 to add electrical contractor as listed above. original permit description:(com2009-17790) install three (3) new wi max antennas on existing building; install (1) new wi max cabinet/equipment; install (1) new microwave antenna. all work to be done existing structure per prints per bmza 643-09 approved 12/8/09 per code. as per plans as per code. if installing suppression system in equipment cabinet(s) then a separate permit is required.

Permit #: COM2010-17862

919 Fawn St, Baltimore, MD 21202

Date: Aug 13, 2010

Permit type: Commercial Contracting

Description: Temp. utilize the curb lane for a 45' moving truck from 10 am to 12 noon

Permit #: ROW2010-03794

3507 Chesterfield Ave, Baltimore, MD 21213

Date: Aug 13, 2010

Permit type: Commercial Contracting

Description: F & i (1) 120v - 20a ckt. for microwave. f & i (2) gfci outlets @ countertop on (1) 120v - 20a ckt. upgrade (4) existing outlets to gfci tamper proof as per code.

Permit #: COM2010-18001

3400 Auchentoroly Terr, Baltimore, MD 21217

Date: Aug 13, 2010

Permit type: Commercial Contracting

Description: Temp. utilize the curb lane for dumpster

Permit #: ROW2010-03822

805 Whitelock St, Baltimore, MD 21217

Date: Aug 13, 2010

Permit type: Commercial Contracting

Description: Original permit description:(com2008-01990) install (20) ckts install (6) low voltage as per code

Permit #: COM2010-18014

342 Bloom St, Baltimore, MD 21217

Date: Aug 13, 2010

Permit type: Commercial Contracting

Description: Amend permit com2010-11897, issued on 08/04/10 with plans #2010-693 to add prime and electrical contractors as listed above. original permit description:(com2010-11897) 3 antennas on existing rooftop with steel platform to hold cabinets. as per plans as per code. if installing suppression system in equipment cabinet then a separate permit is required.per bmza 2010-17 approved 3/16/10

Permit #: COM2010-18049

All data is collected from public records. We do not guarantee accuracy of information.