Van Pond Architect, Pllc

Date: May 23, 2013

Permit type: Remodeling

Description: - construct detached accessory dwelling unit| description| | cladding & trim| - all/any trim railings vents and associated type elements are to be wood or cement fiberboard. clad material is not approved. wood or cement fiberboard shall be a smooth face material void of any simulated wood grain pattern or rough unfinished appearance. all exposed exterior lumber should be grade number #1 or #2. lower grade lumber is unsuitable for exterior work. | - 2 4 inches wood corner boards are typical on the face of each exposed corner except for masonry buildings. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. | - 2 4 inches wood casing typical at doors and windows except for masonry buildings. double and triple windows should have a 4" to 6" mullion between. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. | windows & doors| - if there are muntins only factory installed muntins are approved. self installed snap clip or glue type muntins on windows are not approved. interior type muntins on windows are not approved. windows to be approved by staff prior to installation. | - windows on clapboard structures shall not have brick-mold. | - overhead garage door and pedestrian entry doors may be steel with simple panel design. doors to be approved by staff prior to installation. | roof| - roof material may match the main structure. if roof material is not to match main structure then color to be approved by staff prior to installation. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | ||approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500.

Parcel #: 11704026900

Permit #: HCN 201300160

Date: May 16, 2013

Permit type: Remodeling

Description: Being reviewed by staff for 5/15 meeting| description| | cladding & trim| - all/any trim railings vents and associated type elements are to be wood or cement fiberboard. clad material is not approved. wood or cement fiberboard shall be a smooth face material void of any simulated wood grain pattern or rough unfinished appearance. all exposed exterior lumber should be grade number #1 or #2. lower grade lumber is unsuitable for exterior work. | - 2 4 inches wood corner boards are typical on the face of each exposed corner except for masonry buildings. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. | - 2 4 inches wood casing typical at doors and windows except for masonry buildings. double and triple windows should have a 4" to 6" mullion between. lumber to be of an appropriate trim grade (smooth and square). stud wall lumber is not appropriate. | windows & doors| - if there are muntins only factory installed muntins are approved. self installed snap clip or glue type muntins on windows are not approved. interior type muntins on windows are not approved. windows to be approved by staff prior to installation. | - windows on clapboard structures shall not have brick-mold. | - overhead garage door and pedestrian entry doors may be steel with simple panel design. doors to be approved by staff prior to installation. | roof| - roof material may match the main structure. if roof material is not to match main structure then color to be approved by staff prior to installation. | general specifications| - alterations to be constructed in accordance with attached elevations. any deviation from the approved plans could result in changes being reversed to reflect the approved drawings. please note: mhzc staff may have added notes to the submitted drawings. | - all measurements and relationships of existing conditions and new construction shall be field checked for accuracy with approved plans at the responsibility of the applicant. inaccuracies or differences should be reported to mhzc staff prior to continuing with the project. | - exterior finish materials shall be trim grade (smooth and square). stud wall lumber or embossed wood grain is not appropriate. - any substitutions or deviation from the approved work requires further review and approval by the mhzc prior to work being undertaken. | - the work items listed are approved in accordance with the adopted design guidelines and are not applicable beyond the unique facts and circumstances of this particular application. | - this permit becomes invalid twelve months after issue date. expired permits must be reissued prior to work being undertaken. | ||approval of design should not be considered approval of a particular use. - this is not a building permit. no work can begin without the appropriate review and approval by the metropolitan department of codes administration: howard school building campus (615) 862-6500.

Parcel #: 11704026900

Permit #: HCN 201300044